Hi all.I'm looking for the Installation Manual or pinouts of the King
KN73 glideslope receiver.
I want to hook it up to the KX-170B that I have in the plane.
Does anyone know how these two should interface?
Thanks
Jarand

Jaros³aw Androsiuk wrote:
> Hi all.I'm looking for the Installation Manual or pinouts of the King
> KN73 glideslope receiver.
> I want to hook it up to the KX-170B that I have in the plane.
> Does anyone know how these two should interface?
> Thanks
> Jarand


A copy of the pinouts can be purchased from Eastern Avionics
www.avionix.com if you are unable to find them. I have pinouts for the
175B chassis, and for a KN-75 GS reciever but not a -73. You also may be
able to get a copy off of Ebay... GeBe's Estate Sales is a good ebay
store source for stuff like that...

It is important to know if the 175B is already prewired at the connector
on the back of the tray. If it is not, then you will need to install
wiring by soldering to pins on the back of a 42 pin AMP connector. The
manual I have for the 175B recommends minimum 24 ga wiring unless
otherwise specified.

I have a copy of the pinouts for the 175B at
http://www.eaa12.org/files/175-195outs.pdf and the diagram shows
attachment to an indicator with integral glideslope reciever. Not
EXACTLY what you are looking for but shows the relationship between the
175B and a typical GS reciever.

Good luck.
Dave

I have the pinout for the KN73, but no install manual. Let me know how
to get it to you - fax or e-mail.

Steve

"Jaros³aw Androsiuk" > wrote in message
...
> Hi all.I'm looking for the Installation Manual or pinouts of the King KN73
> glideslope receiver.
> I want to hook it up to the KX-170B that I have in the plane.
> Does anyone know how these two should interface?
> Thanks
> Jarand

This might help. http://www.aeroelectric.com/Installation_Data/Kn-73.pdf

"Jaros³aw Androsiuk" > wrote in message
...
> Hi all.I'm looking for the Installation Manual or pinouts of the King KN73
> glideslope receiver.
> I want to hook it up to the KX-170B that I have in the plane.
> Does anyone know how these two should interface?
> Thanks
> Jarand

Whenever I have a strange set of avionics that is not the latest and
greatest stuff which I can never afford to hook up I give Essco a call.
They advertise every month in Trade-A-Plane and will happily sell you a
photocopied manual for just about anything to do with aviation. I haven't
stumped them yet.

Highflyer
Highflight Aviation Services
Pinckneyville Airport ( PJY )